CNC Machining Services | Precision Parts Manufacturing

Machined Components
sourced from India.

Need a precise fit? Magnus provides high-accuracy machined parts made to your exact measurements and tolerances. Our machining partners run deep multi-axis capacity — vertical and horizontal machining centres, CNC turning and vertical turning, wire-cut EDM, and grinding — with a CMM standard room and per-part dimensional reporting. From a 5-piece prototype to 100,000 parts a month, every component is cut, measured, and documented.

CNC Machining
precision + repeatability

Precision machining is a core strength of India's engineering sector — often complementing castings and forgings with finish-machined, ready-to-assemble components. India hosts thousands of CNC turning and milling centres across Pune, Coimbatore, Bengaluru, Ludhiana, and Rajkot, many running multi-axis equipment that holds tight tolerances to ±0.01 mm or better. A key advantage: buyers can source casting or forging and machining from the same supply base, reducing lead time and logistics complexity.

Magnus matches each part to the machining centre best suited to its tolerance and material — then manages sampling, quality inspection, and shipping.

At a Glance

Tolerance down to ±0.01mm

Axes 3 / 4 / 5-axis CNC

Surface finish down to Ra 0.2 µm

Volumes prototypes to 100,000+/yr

Process
capabilities.

Specification	Detail
Processes	CNC turning, milling (3/4/5-axis), boring, grinding, honing, gun drilling
Materials	Cast iron, carbon & alloy steel, stainless steel, aluminium, brass, bronze
Tolerance	±0.1mm to ±0.5mm
Part input	Machined from bar stock, castings, or forgings ready to assemble
Quality	CMM standard room with per-part dimensional inspection reports on request, plus tensile, ultrasonic, MPI, hardness, spectrometer, roundness, contour and digital bore-gauge testing. Independent third-party inspection can be arranged.
Typical Parts	Hydraulic blocks and manifolds, valve bodies, pump components, shafts, housings and end-covers, gears, precision brackets, and machined castings/forgings for automotive, aerospace, oil & gas, and machine-tool applications.
Export markets	USA, Europe, UK, Israel, Italy,UAE,Canada

Components we
machine.

Automotive & Engines

Shafts
Spindles
Cylinder Liners
Bearing Housings
Engine Bores

Oil & Gas

Valve Blocks
Manifolds
Deep-Bored Bodies
Injection nozzle bodies

Hydraulics

Cylinder Liners
Valve Blocks
Pump Housings
Precision Sleeves

Pumps & Power Transmission

Pump Housings
Shafts
Coupling Components
Gear Blanks

Bearings & Precision

Bearing Races
Precision Shafts
Gauge Components
Hardened Parts

Machinery & Tooling

Precision Fixtures
Tooling Components
Manifolds
Bushings

Six steps from
raw stock to finished part.

Material Preparation

Bar stock, castings, or forgings are prepared for machining.

Turning

Cylindrical features are turned to size on CNC lathes.

Milling

Multi-axis milling cuts complex features and surfaces.

Boring & Drilling

Holes and deep bores are machined to precise diameters.

Grinding & Honing

Critical surfaces are ground and honed to final tolerance and finish.

Inspection

The part is CMM-inspected and documented before dispatch.

Alloys &
materials.

Ferrous

Cast iron
Carbon steel
Alloy steel
Stainless steel

Non-Ferrous

Aluminium
Brass
Bronze

Specialty

Other grades available on request

Questions buyers
ask us first.

Can Magnus supply machining together with casting or forging?

Yes. Sourcing casting or forging and machining from the same supply base shortens lead times and simplifies logistics parts arrive finish-machined and ready to assemble.

What tolerances can be held?

Multi-axis machining centres hold tight tolerances to ±0.01 mm or better, depending on the part and material.

How is quality verified?

From prototypes and low-volume Swiss/3-axis runs up to 100,000+ parts per year. We advise the most cost-effective route for your volume.

Which materials and markets does Magnus serve?

Cast iron, carbon and alloy steel, stainless steel, aluminium, brass, and bronze — exported to the USA, Germany, the UK, Israel, and Italy.

Machined Components sourced from India.

CNC Machiningprecision + repeatability